Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Silicone render · England

Silicone render in Nottinghamshire

Quotes for silicone render in Nottinghamshire set out the system, detailing, access and VAT position in writing. If you're re-rendering in Nottinghamshire, we'll show you what adding insulation under the silicone would cost at the same time.

  • Free survey and fixed written price
  • Guide price from £66 per m² + scaffold, inc VAT
  • Planning and building control checked for England

Free survey in Nottinghamshire

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Vapour-open, so walls can still breathe
  • Can also go straight onto prepared masonry
  • Through-coloured — no painting needed
  • Used as the finish on most EWI systems
  • Fine, even grain from about 1–2mm
A gloved hand finishing off-white textured silicone render with a steel trowel

Local considerations in Nottinghamshire

Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.

Much of Nottinghamshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Silicone suits most rendering jobs in Nottinghamshire, either on its own or over insulation.

Nation
England
Region
East Midlands
Towns covered
Nottingham, Mansfield, West Bridgford, Sutton-in-Ashfield, Newark-on-Trent, Arnold, Hucknall, Kirkby-in-Ashfield…
Guide price
From £66 per m² + scaffold · inc VAT

England: planning and regulations

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

How is silicone render applied?

On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.

Silicone render prices in Nottinghamshire

Silicone render guide prices
ItemGuide priceNotes
Silicone render on masonry (with base coat + mesh)£66–£102 per m²inc VATExcluding scaffold
Front and side of a semi (≈60 m²)£3,960–£6,120inc VATPlus scaffold
As the finish on EWIIncluded in EWI rates

Confirmed by a fixed written quote after survey. Prices include VAT at 20%.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Silicone render in Nottinghamshire: questions

Does silicone render crack?

The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.

Can silicone render go over old render?

If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.

Can I paint silicone render later?

Yes, with a compatible silicone paint, though through-coloured render rarely needs it.

Do you cover all of Nottinghamshire?

Yes. We survey and quote silicone render across Nottinghamshire, including Nottingham, Mansfield, West Bridgford, Sutton-in-Ashfield, Newark-on-Trent.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Silicone render in Nottinghamshire

Get a free survey and fixed written price for silicone render in Nottinghamshire.

Call freeGet a quote