Silicone render · Oxfordshire
Silicone render in Bicester
If you're planning silicone render in Bicester, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Silicone suits most rendering jobs in Bicester, either on its own or over insulation.
- Free survey in OX26 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Bicester
Postcode, service and a phone number is all we need.
Part of every quote
- Used as the finish on most EWI systems
- Fine, even grain from about 1–2mm
- Can also go straight onto prepared masonry
- Water-repellent surface that dries quickly after rain
Homes and walls in Bicester
We cover Bicester and nearby Oxford, Banbury and Aylesbury. It's roughly 11 miles from Bicester to Oxford, the largest town in Oxfordshire. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Oxfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On tree-shaded or north-facing walls in Bicester, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- OX26
- County or area
- Oxfordshire
- Nation
- England
- Nearby
- Oxford, Banbury, Aylesbury, Witney
Permissions in England
For a house in Bicester, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Bicester
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Bicester: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Bicester?
Yes — we survey and quote silicone render in Bicester (OX26) and nearby Oxford, Banbury and Aylesbury, with a fixed written price before any work starts.