Silicone render · Oxfordshire
Silicone render in Oxford
Quotes for silicone render in Oxford list the system, the detailing and the VAT position in writing, so you know exactly what's included. If you're re-rendering in Oxford, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in OX1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Oxford
Postcode, service and a phone number is all we need.
What's included
- Can also go straight onto prepared masonry
- Used as the finish on most EWI systems
- Fine, even grain from about 1–2mm
- Water-repellent surface that dries quickly after rain
Homes and walls in Oxford
We also cover Abingdon and Didcot, close to Oxford. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Oxfordshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Oxford, either on its own or over insulation.
- Postcode district
- OX1
- County or area
- Oxfordshire
- Nation
- England
- Nearby
- Abingdon, Didcot, Witney, Bicester
England: planning and regulations
Planning in Oxford follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Oxford
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Oxford: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Do you cover Oxford?
Yes — we survey and quote silicone render in Oxford (OX1) and nearby Abingdon, Didcot and Witney, with a fixed written price before any work starts.