Silicone render · Shropshire
Silicone render in Wellington
Need silicone render in Wellington? Tell us about the property and we'll arrange a free survey and a written quote. Silicone suits most rendering jobs in Wellington, either on its own or over insulation.
- Free survey in TF1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Wellington
Postcode, service and a phone number is all we need.
What's included
- Vapour-open, so walls can still breathe
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
- Water-repellent surface that dries quickly after rain
Wellington: walls, weather and approvals
Surveys in Wellington also cover the surrounding TF1 district and towns such as Telford and Shrewsbury. Wellington is about 3 miles from Telford. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Exposure to wind-driven rain varies across Shropshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On tree-shaded or north-facing walls in Wellington, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- TF1
- County or area
- Shropshire
- Nation
- England
- Nearby
- Telford, Shrewsbury, Stafford, Wolverhampton
Permissions in England
Before quoting in Wellington, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Wellington
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Wellington: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Wellington?
Yes — we survey and quote silicone render in Wellington (TF1) and nearby Telford, Shrewsbury and Stafford, with a fixed written price before any work starts.