Silicone render · Tyne and Wear
Silicone render in Wallsend
If you're planning silicone render in Wallsend, start with a free survey: we measure, check the walls and confirm planning and building control for your address. If you're re-rendering in Wallsend, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in NE28 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Wallsend
Postcode, service and a phone number is all we need.
What you get
- Water-repellent surface that dries quickly after rain
- Through-coloured — no painting needed
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
Homes and walls in Wallsend
Surveys in Wallsend also cover the surrounding NE28 district and towns such as Jarrow and Felling. Wallsend is about 3 miles from Newcastle upon Tyne. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Tyne and Wear: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Wallsend, either on its own or over insulation.
- Postcode district
- NE28
- County or area
- Tyne and Wear
- Nation
- England
- Nearby
- Jarrow, Felling, Gosforth, Gateshead
England: planning and regulations
For a house in Wallsend, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Wallsend
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Wallsend: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Wallsend?
Yes — we survey and quote silicone render in Wallsend (NE28) and nearby Jarrow, Felling and Gosforth, with a fixed written price before any work starts.