Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Solid wall insulation · England

Solid wall insulation in Cheshire

We provide solid wall insulation across Cheshire, including Warrington, Chester and Crewe, with a free survey and fixed written price. For Cheshire homeowners weighing external against internal insulation, the survey sets out both with prices.

  • Free survey and fixed written price
  • Guide price from £75 per m² + scaffold, 0% VAT
  • Planning and building control checked for England

Free survey in Cheshire

Tell us the postcode and what you need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Breathable options for stone and lime-mortared walls
  • Both can be done in stages, elevation by elevation or room by room
  • External insulation keeps room sizes and treats cold bridges well
  • In England and Wales, Building Regulations apply when more than half of a wall is treated
  • Solid walls can lose heat roughly twice as fast as an insulated cavity wall
Victorian end-of-terrace house with dark insulation boards fixed to the lower half of the gable wall behind scaffolding

Local considerations in Cheshire

The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Exposure to wind-driven rain varies across Cheshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For solid-walled homes in Cheshire, we check wall thickness and age first to confirm there's no cavity to fill.

Nation
England
Region
North West
Towns covered
Warrington, Chester, Crewe, Macclesfield, Runcorn, Ellesmere Port, Widnes, Northwich…
Guide price
From £75 per m² + scaffold · 0% VAT

Approvals in England

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.

Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.

External or internal — which is better?

External insulation keeps the wall warm, reduces cold bridging at floors and party walls, renews the outside, and doesn't shrink rooms — but it changes the look and needs scaffolding. Internal insulation keeps the façade unchanged and can be done room by room, but loses 50–100mm of floor space per wall and needs careful detailing to avoid condensation at joists and corners.

Solid wall insulation prices in Cheshire

Solid wall insulation guide prices
ItemGuide priceNotes
External (EWI)£105–£210 per m²0% VATBy board and finish
Internal (IWI)£75–£130 per m²0% VATPlus making good
Survey and written recommendationFree with a quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Solid wall insulation in Cheshire: questions

Is solid wall insulation worth it?

For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.

Does solid wall insulation cause condensation?

It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.

Can I get a grant for solid wall insulation?

Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.

Do you cover all of Cheshire?

Yes. We survey and quote solid wall insulation across Cheshire, including Warrington, Chester, Crewe, Macclesfield, Runcorn.

Do I need planning permission in England?

For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.

Solid wall insulation in Cheshire

Book a free survey in Cheshire — no obligation.

Call freeGet a quote