Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Solid wall insulation · Derbyshire

Solid wall insulation in Long Eaton

Looking for solid wall insulation in Long Eaton? We survey homes across Long Eaton and the NG10 area, then give you a fixed written price before any work starts. On solid-walled houses in Long Eaton, the gable or the most weather-exposed wall is often the place to start.

  • Free survey in NG10 and nearby
  • Guide price from £75 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Long Eaton

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • In England and Wales, Building Regulations apply when more than half of a wall is treated
  • Both can be done in stages, elevation by elevation or room by room
  • Internal insulation suits single rooms or where the outside can't change
  • External insulation keeps room sizes and treats cold bridges well
Victorian end-of-terrace house with dark insulation boards fixed to the lower half of the gable wall behind scaffolding

Long Eaton: walls, weather and approvals

As well as Long Eaton itself, we quote in Ilkeston, Nottingham and West Bridgford. Long Eaton sits around 9 miles from Derby. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.

Exposure to wind-driven rain varies across Derbyshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For Long Eaton homeowners weighing external against internal insulation, the survey sets out both with prices.

Postcode district
NG10
County or area
Derbyshire
Nation
England
Nearby
Ilkeston, Nottingham, West Bridgford, Heanor

Planning and building control in England

For a house in Long Eaton, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

How can I tell if my walls are solid?

Measure the wall thickness at a window or door: about 225mm (9 inches) of brick usually means solid, while 260mm or more often means a cavity. On exposed brick, a pattern with bricks laid end-on (headers) every few courses points to solid construction. Stone walls are usually solid regardless of thickness. Age is a strong clue too — most homes built before the 1920s are solid-walled.

Solid wall insulation prices in Long Eaton

Solid wall insulation guide prices
ItemGuide priceNotes
External (EWI)£105–£210 per m²0% VATBy board and finish
Internal (IWI)£75–£130 per m²0% VATPlus making good
Survey and written recommendationFree with a quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Solid wall insulation in Long Eaton: questions

Can I get a grant for solid wall insulation?

Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.

Does solid wall insulation cause condensation?

It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.

Can I do one wall at a time?

Yes. Many owners start with the coldest or most exposed elevation, often a gable end.

Do you cover Long Eaton?

Yes — we survey and quote solid wall insulation in Long Eaton (NG10) and nearby Ilkeston, Nottingham and West Bridgford, with a fixed written price before any work starts.

Solid wall insulation in Long Eaton

Start with a guide price, then fix it with a free survey in Long Eaton.

Call freeGet a quote