Solid wall insulation · Wales
Solid wall insulation in Dyfed
Planning solid wall insulation anywhere in Dyfed? We cover towns including Llanelli and Ammanford, and check planning and building control for each address. On solid-walled houses in Dyfed, the gable or the most weather-exposed wall is often the place to start.
- Free survey and fixed written price
- Guide price from £75 per m² + scaffold, 0% VAT
- Planning and building control checked for Wales
Free survey in Dyfed
Tell us the postcode and what you need.
Part of every quote
- Both can be done in stages, elevation by elevation or room by room
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- Internal insulation suits single rooms or where the outside can't change
- In England and Wales, Building Regulations apply when more than half of a wall is treated
- Breathable options for stone and lime-mortared walls
Homes and walls in Dyfed
West Wales has a high share of older solid-walled and stone homes, many in exposed coastal or rural settings.
Parts of Dyfed fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
For solid-walled homes in Dyfed, we check wall thickness and age first to confirm there's no cavity to fill.
- Nation
- Wales
- Region
- West Wales
- Towns covered
- Llanelli, Ammanford, Carmarthen, Aberystwyth, Milford Haven, Haverfordwest
- Guide price
- From £75 per m² + scaffold · 0% VAT
Approvals in Wales
Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. Your local planning authority has the final word.
The Building Regulations as they apply in Wales treat insulating or re-rendering more than half of a wall's area, or more than a quarter of the building's whole envelope, as renovating a thermal element, with Approved Document L (Wales) setting the target. Building control is involved before work starts.
How can I tell if my walls are solid?
Measure the wall thickness at a window or door: about 225mm (9 inches) of brick usually means solid, while 260mm or more often means a cavity. On exposed brick, a pattern with bricks laid end-on (headers) every few courses points to solid construction. Stone walls are usually solid regardless of thickness. Age is a strong clue too — most homes built before the 1920s are solid-walled.
Solid wall insulation prices in Dyfed
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Dyfed: questions
Does solid wall insulation cause condensation?
It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.
Can I get a grant for solid wall insulation?
Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Do you cover all of Dyfed?
Yes. We survey and quote solid wall insulation across Dyfed, including Llanelli, Ammanford, Carmarthen, Aberystwyth, Milford Haven.
Do I need planning permission in Wales?
Permitted development rules for houses in Wales are similar to England's: a similar-appearance finish on a house is often permitted, while conservation areas, National Parks, Areas of Outstanding Natural Beauty, flats, commercial buildings and listed buildings need permission or consent. We check your address before quoting.