Solid wall insulation · Greater London
Solid wall insulation in Mitcham
Need solid wall insulation in Mitcham? Tell us about the property and we'll arrange a free survey and a written quote. For Mitcham homeowners weighing external against internal insulation, the survey sets out both with prices.
- Free survey in CR4 and nearby
- Guide price from £75 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Mitcham
Postcode, service and a phone number is all we need.
What you get
- In England and Wales, Building Regulations apply when more than half of a wall is treated
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- External insulation keeps room sizes and treats cold bridges well
- Breathable options for stone and lime-mortared walls
Before we quote in Mitcham
We cover Mitcham and nearby Morden, Wimbledon and Streatham. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On solid-walled houses in Mitcham, the gable or the most weather-exposed wall is often the place to start.
- Postcode district
- CR4
- County or area
- Greater London
- Nation
- England
- Nearby
- Morden, Wimbledon, Streatham, Carshalton
Planning and building control in England
Planning in Mitcham follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What does solid wall insulation cost?
External systems run at roughly £105–£210 per m² of wall depending on the board and finish. Internal insulation is roughly £75–£130 per m², plus the cost of moving radiators, sockets and kitchen units.
Solid wall insulation prices in Mitcham
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Mitcham: questions
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Does solid wall insulation cause condensation?
It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.
Can I get a grant for solid wall insulation?
Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.
Do you cover Mitcham?
Yes — we survey and quote solid wall insulation in Mitcham (CR4) and nearby Morden, Wimbledon and Streatham, with a fixed written price before any work starts.