Solid wall insulation · Herefordshire
Solid wall insulation in Ross-on-Wye
If you're planning solid wall insulation in Ross-on-Wye, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On solid-walled houses in Ross-on-Wye, the gable or the most weather-exposed wall is often the place to start.
- Free survey in HR9 and nearby
- Guide price from £75 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Ross-on-Wye
Postcode, service and a phone number is all we need.
What's included
- External insulation keeps room sizes and treats cold bridges well
- Internal insulation suits single rooms or where the outside can't change
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- Both can be done in stages, elevation by elevation or room by room
Homes and walls in Ross-on-Wye
As well as Ross-on-Wye itself, we quote in Hereford, Gloucester and Malvern. Ross-on-Wye sits around 11 miles from Hereford. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Exposure to wind-driven rain varies across Herefordshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For Ross-on-Wye homeowners weighing external against internal insulation, the survey sets out both with prices.
- Postcode district
- HR9
- County or area
- Herefordshire
- Nation
- England
- Nearby
- Hereford, Gloucester, Malvern, Stroud
Permissions in England
Before quoting in Ross-on-Wye, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How can I tell if my walls are solid?
Measure the wall thickness at a window or door: about 225mm (9 inches) of brick usually means solid, while 260mm or more often means a cavity. On exposed brick, a pattern with bricks laid end-on (headers) every few courses points to solid construction. Stone walls are usually solid regardless of thickness. Age is a strong clue too — most homes built before the 1920s are solid-walled.
Solid wall insulation prices in Ross-on-Wye
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Ross-on-Wye: questions
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Does solid wall insulation cause condensation?
It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Do you cover Ross-on-Wye?
Yes — we survey and quote solid wall insulation in Ross-on-Wye (HR9) and nearby Hereford, Gloucester and Malvern, with a fixed written price before any work starts.