Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Solid wall insulation · Kent

Solid wall insulation in Ashford (Kent)

From Ashford (Kent) to Canterbury, we price solid wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. For solid-walled homes in Ashford (Kent), we check wall thickness and age first to confirm there's no cavity to fill.

  • Free survey in TN24 and nearby
  • Guide price from £75 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Ashford (Kent)

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Internal insulation suits single rooms or where the outside can't change
  • Solid walls can lose heat roughly twice as fast as an insulated cavity wall
  • Both can be done in stages, elevation by elevation or room by room
  • Breathable options for stone and lime-mortared walls
Victorian end-of-terrace house with dark insulation boards fixed to the lower half of the gable wall behind scaffolding

What we look for in Ashford (Kent)

We cover Ashford (Kent) and nearby Canterbury, Folkestone and Sittingbourne. Ashford (Kent) is about 18 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

For Ashford (Kent) homeowners weighing external against internal insulation, the survey sets out both with prices.

Postcode district
TN24
County or area
Kent
Nation
England
Nearby
Canterbury, Folkestone, Sittingbourne, Whitstable

England: planning and regulations

Planning in Ashford (Kent) follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

External or internal — which is better?

External insulation keeps the wall warm, reduces cold bridging at floors and party walls, renews the outside, and doesn't shrink rooms — but it changes the look and needs scaffolding. Internal insulation keeps the façade unchanged and can be done room by room, but loses 50–100mm of floor space per wall and needs careful detailing to avoid condensation at joists and corners.

Solid wall insulation prices in Ashford (Kent)

Solid wall insulation guide prices
ItemGuide priceNotes
External (EWI)£105–£210 per m²0% VATBy board and finish
Internal (IWI)£75–£130 per m²0% VATPlus making good
Survey and written recommendationFree with a quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Solid wall insulation in Ashford (Kent): questions

Can I get a grant for solid wall insulation?

Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.

Does solid wall insulation cause condensation?

It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.

Is solid wall insulation worth it?

For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.

Do you cover Ashford (Kent)?

Yes — we survey and quote solid wall insulation in Ashford (Kent, TN24) and nearby Canterbury, Folkestone and Sittingbourne, with a fixed written price before any work starts.

Solid wall insulation in Ashford (Kent)

Get a free survey and fixed written price for solid wall insulation in Ashford (Kent).

Call freeGet a quote