Solid wall insulation · Kent
Solid wall insulation in Strood
Looking for solid wall insulation in Strood? We survey homes across Strood and the ME2 area, then give you a fixed written price before any work starts. For Strood homeowners weighing external against internal insulation, the survey sets out both with prices.
- Free survey in ME2 and nearby
- Guide price from £75 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Strood
Postcode, service and a phone number is all we need.
Included as standard
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- In England and Wales, Building Regulations apply when more than half of a wall is treated
- Both can be done in stages, elevation by elevation or room by room
- Breathable options for stone and lime-mortared walls
Local considerations in Strood
We also cover Rochester and Chatham, close to Strood. Strood is about 9 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For solid-walled homes in Strood, we check wall thickness and age first to confirm there's no cavity to fill.
- Postcode district
- ME2
- County or area
- Kent
- Nation
- England
- Nearby
- Rochester, Chatham, Gillingham, Gravesend
Planning and building control in England
For a house in Strood, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
External or internal — which is better?
External insulation keeps the wall warm, reduces cold bridging at floors and party walls, renews the outside, and doesn't shrink rooms — but it changes the look and needs scaffolding. Internal insulation keeps the façade unchanged and can be done room by room, but loses 50–100mm of floor space per wall and needs careful detailing to avoid condensation at joists and corners.
Solid wall insulation prices in Strood
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Strood: questions
Can I get a grant for solid wall insulation?
Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Do you cover Strood?
Yes — we survey and quote solid wall insulation in Strood (ME2) and nearby Rochester, Chatham and Gillingham, with a fixed written price before any work starts.