Solid wall insulation · Somerset
Solid wall insulation in Portishead
Solid wall insulation in Portishead: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. For Portishead homeowners weighing external against internal insulation, the survey sets out both with prices.
- Free survey in BS20 and nearby
- Guide price from £75 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Portishead
Postcode, service and a phone number is all we need.
What the job covers
- Breathable options for stone and lime-mortared walls
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- Both can be done in stages, elevation by elevation or room by room
- External insulation keeps room sizes and treats cold bridges well
What we look for in Portishead
Surveys in Portishead also cover the surrounding BS20 district and towns such as Nailsea and Clevedon. Portishead sits around 19 miles from Bath. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
On solid-walled houses in Portishead, the gable or the most weather-exposed wall is often the place to start.
- Postcode district
- BS20
- County or area
- Somerset
- Nation
- England
- Nearby
- Nailsea, Clevedon, Kingswood, Mangotsfield
Planning and building control in England
For a house in Portishead, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How can I tell if my walls are solid?
Measure the wall thickness at a window or door: about 225mm (9 inches) of brick usually means solid, while 260mm or more often means a cavity. On exposed brick, a pattern with bricks laid end-on (headers) every few courses points to solid construction. Stone walls are usually solid regardless of thickness. Age is a strong clue too — most homes built before the 1920s are solid-walled.
Solid wall insulation prices in Portishead
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Portishead: questions
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Does solid wall insulation cause condensation?
It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Do you cover Portishead?
Yes — we survey and quote solid wall insulation in Portishead (BS20) and nearby Nailsea, Clevedon and Kingswood, with a fixed written price before any work starts.