Solid wall insulation · England
Solid wall insulation in Surrey
Get guide prices online, then a free survey and fixed quote for solid wall insulation in Surrey, including Guildford and Esher. For Surrey homeowners weighing external against internal insulation, the survey sets out both with prices.
- Free survey and fixed written price
- Guide price from £75 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in Surrey
Tell us the postcode and what you need.
What's included
- External insulation keeps room sizes and treats cold bridges well
- Both can be done in stages, elevation by elevation or room by room
- Breathable options for stone and lime-mortared walls
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- In England and Wales, Building Regulations apply when more than half of a wall is treated
Surrey: walls, weather and approvals
Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For solid-walled homes in Surrey, we check wall thickness and age first to confirm there's no cavity to fill.
- Nation
- England
- Region
- South East
- Towns covered
- Woking, Guildford, Esher, Reigate, Redhill, Staines, Banstead, Leatherhead…
- Guide price
- From £75 per m² + scaffold · 0% VAT
Approvals in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
How can I tell if my walls are solid?
Measure the wall thickness at a window or door: about 225mm (9 inches) of brick usually means solid, while 260mm or more often means a cavity. On exposed brick, a pattern with bricks laid end-on (headers) every few courses points to solid construction. Stone walls are usually solid regardless of thickness. Age is a strong clue too — most homes built before the 1920s are solid-walled.
Solid wall insulation prices in Surrey
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Surrey: questions
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Can I get a grant for solid wall insulation?
Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Do you cover all of Surrey?
Yes. We survey and quote solid wall insulation across Surrey, including Woking, Guildford, Esher, Reigate, Redhill.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.