Solid wall insulation · West Midlands
Solid wall insulation in Shirley
If you're planning solid wall insulation in Shirley, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On solid-walled houses in Shirley, the gable or the most weather-exposed wall is often the place to start.
- Free survey in B28 and nearby
- Guide price from £75 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Shirley
Postcode, service and a phone number is all we need.
Included as standard
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- External insulation keeps room sizes and treats cold bridges well
- In England and Wales, Building Regulations apply when more than half of a wall is treated
- Internal insulation suits single rooms or where the outside can't change
Local considerations in Shirley
We cover Shirley and nearby Solihull, Birmingham and Redditch. Shirley sits around 6 miles from Birmingham. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of West Midlands sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For solid-walled homes in Shirley, we check wall thickness and age first to confirm there's no cavity to fill.
- Postcode district
- B28
- County or area
- West Midlands
- Nation
- England
- Nearby
- Solihull, Birmingham, Redditch, Halesowen
Planning and building control in England
For a house in Shirley, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What does solid wall insulation cost?
External systems run at roughly £105–£210 per m² of wall depending on the board and finish. Internal insulation is roughly £75–£130 per m², plus the cost of moving radiators, sockets and kitchen units.
Solid wall insulation prices in Shirley
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Shirley: questions
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Does solid wall insulation cause condensation?
It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Do you cover Shirley?
Yes — we survey and quote solid wall insulation in Shirley (B28) and nearby Solihull, Birmingham and Redditch, with a fixed written price before any work starts.