Wood fibre EWI · Greater London
Wood fibre insulation for older homes in Battersea
If you're planning wood fibre external wall insulation in Battersea, start with a free survey: we measure, check the walls and confirm planning and building control for your address. If your home in Battersea is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Free survey in SW11 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Battersea
Postcode, service and a phone number is all we need.
What the job covers
- Compatible with lime renders used on traditional buildings
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Often the most suitable EWI where planning allows on older properties
- High density gives good protection from summer heat
Local considerations in Battersea
As well as Battersea itself, we quote in Chelsea, Fulham and Brixton. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For period homes in Battersea, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.
- Postcode district
- SW11
- County or area
- Greater London
- Nation
- England
- Nearby
- Chelsea, Fulham, Brixton, Putney
Planning and building control in England
Planning in Battersea follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What about listed buildings and conservation areas?
EWI on a listed building needs listed building consent and is often refused where the outside appearance matters. In conservation areas, rendering or cladding a house normally needs planning permission. Wood fibre and lime are more likely to be acceptable than foam and acrylic, but the council decides. We check before quoting.
Wood fibre insulation for older homes prices in Battersea
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Wood fibre EWI in Battersea: questions
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Do you cover Battersea?
Yes — we survey and quote wood fibre external wall insulation in Battersea (SW11) and nearby Chelsea, Fulham and Brixton, with a fixed written price before any work starts.