Wood fibre EWI · Greater London
Wood fibre insulation for older homes in Chelsea
Wood fibre insulation for older homes in Chelsea: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. If your home in Chelsea is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Free survey in SW3 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Chelsea
Postcode, service and a phone number is all we need.
What you get
- Thicker than foam for the same U-value
- Compatible with lime renders used on traditional buildings
- Often the most suitable EWI where planning allows on older properties
- High density gives good protection from summer heat
Homes and walls in Chelsea
As well as Chelsea itself, we quote in Battersea, Fulham and Shepherds Bush. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.
Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For period homes in Chelsea, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.
- Postcode district
- SW3
- County or area
- Greater London
- Nation
- England
- Nearby
- Battersea, Fulham, Shepherds Bush, Putney
Planning and building control in England
Planning in Chelsea follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Why do older walls need breathable insulation?
Stone and early brick walls were built with lime mortars and renders that let moisture in and out. Sealing them with impermeable materials can trap water in the wall, leading to damp and frost damage. Wood fibre keeps the build-up open to vapour, and its ability to absorb and release moisture helps the wall stay in balance.
Wood fibre insulation for older homes prices in Chelsea
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Wood fibre EWI in Chelsea: questions
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Does wood fibre need a lime render?
It needs the render specified by the system manufacturer, which is usually lime or mineral based.
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Do you cover Chelsea?
Yes — we survey and quote wood fibre external wall insulation in Chelsea (SW3) and nearby Battersea, Fulham and Shepherds Bush, with a fixed written price before any work starts.