EPS insulation · Fife
EPS external wall insulation in Dunfermline
From Dunfermline to Livingston, we price EPS external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Where eaves are shallow on a house in Dunfermline, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in KY12 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Dunfermline
Postcode, service and a phone number is all we need.
What the job covers
- Grey graphite EPS reaches a given U-value with a thinner board
- Light boards mean fewer fixings and a faster install
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
Local considerations in Dunfermline
As well as Dunfermline itself, we quote in Livingston, Kirkcaldy and Edinburgh. East Central Scotland mixes stone tenements and terraces with post-war council housing and harled bungalows and semis.
Exposure to wind-driven rain varies across Fife: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We compare EPS against mineral wool for each Dunfermline enquiry rather than assuming one board suits every wall.
- Postcode district
- KY12
- County or area
- Fife
- Nation
- Scotland
- Nearby
- Livingston, Kirkcaldy, Edinburgh, Alloa
Planning and building control in Scotland
For Dunfermline properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Scotland's building standards cover changes to external wall construction; we check whether your job in Dunfermline needs a warrant.
What is EPS insulation?
Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.
EPS external wall insulation prices in Dunfermline
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Dunfermline: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover Dunfermline?
Yes — we survey and quote EPS external wall insulation in Dunfermline (KY12) and nearby Livingston, Kirkcaldy and Edinburgh, with a fixed written price before any work starts.