EPS insulation · Forth Valley
EPS external wall insulation in Falkirk
Need EPS external wall insulation in Falkirk? Tell us about the property and we'll arrange a free survey and a written quote. We compare EPS against mineral wool for each Falkirk enquiry rather than assuming one board suits every wall.
- Free survey in FK1 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Falkirk
Postcode, service and a phone number is all we need.
What the job covers
- Light boards mean fewer fixings and a faster install
- Used on low-rise houses; combustible, so not for taller buildings
- Grey graphite EPS reaches a given U-value with a thinner board
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
Local considerations in Falkirk
We also cover Alloa and Cumbernauld, close to Falkirk. Falkirk sits around 10 miles from Stirling. East Central Scotland mixes stone tenements and terraces with post-war council housing and harled bungalows and semis.
Exposure to wind-driven rain varies across Forth Valley: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Falkirk.
- Postcode district
- FK1
- County or area
- Forth Valley
- Nation
- Scotland
- Nearby
- Alloa, Cumbernauld, Bathgate, Stirling
Approvals in Scotland
Scottish householder rules mean many Falkirk jobs that change the outside of a house need a planning application; we confirm the position before quoting.
Where a building warrant is needed for Falkirk work, it's obtained before installation starts, and the quote says who arranges it.
When is EPS the right choice?
EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.
EPS external wall insulation prices in Falkirk
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Falkirk: questions
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Falkirk?
Yes — we survey and quote EPS external wall insulation in Falkirk (FK1) and nearby Alloa, Cumbernauld and Bathgate, with a fixed written price before any work starts.