Free survey · Fixed written price · UK-wideCall free 0800 088 6248

EPS insulation · Lanarkshire

EPS external wall insulation in Cumbernauld

Looking for EPS external wall insulation in Cumbernauld? We survey homes across Cumbernauld and the G67 area, then give you a fixed written price before any work starts. We compare EPS against mineral wool for each Cumbernauld enquiry rather than assuming one board suits every wall.

  • Free survey in G67 and nearby
  • Guide price from £105 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Cumbernauld

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Grey graphite EPS reaches a given U-value with a thinner board
  • Used on low-rise houses; combustible, so not for taller buildings
  • Light boards mean fewer fixings and a faster install
  • Easy to shape around bays, arches and reveals
Close-up of white EPS insulation boards being fixed to a brick wall with orange-capped mechanical fixings

Homes and walls in Cumbernauld

As well as Cumbernauld itself, we quote in Airdrie, Coatbridge and Falkirk. It's roughly 15 miles from Cumbernauld to East Kilbride, the largest town in Lanarkshire. West Central Scotland has sandstone tenements, interwar and post-war council housing including no-fines and other system-built types, and many harled (roughcast) houses.

Exposure to wind-driven rain varies across Lanarkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

Where eaves are shallow on a house in Cumbernauld, grey EPS can sometimes avoid the cost of extending the roofline.

Postcode district
G67
County or area
Lanarkshire
Nation
Scotland
Nearby
Airdrie, Coatbridge, Falkirk, Bellshill

Permissions in Scotland

For Cumbernauld properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.

Scotland's building standards cover changes to external wall construction; we check whether your job in Cumbernauld needs a warrant.

What is EPS insulation?

Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.

EPS external wall insulation prices in Cumbernauld

EPS external wall insulation guide prices
ItemGuide priceNotes
EPS + silicone render£105–£145 per m²0% VATExcluding scaffold
Grey EPS uplift+£4–£8 per m²0% VATThinner board for the same U-value
Bungalow, full house£6,700–£12,8000% VAT55–75 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

EPS insulation in Cumbernauld: questions

Is EPS insulation safe on a house?

EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.

White or grey EPS?

Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.

How long does EPS last on a wall?

The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.

Do you cover Cumbernauld?

Yes — we survey and quote EPS external wall insulation in Cumbernauld (G67) and nearby Airdrie, Coatbridge and Falkirk, with a fixed written price before any work starts.

EPS insulation in Cumbernauld

Book a free survey in Cumbernauld — no obligation.

Call freeGet a quote