EPS insulation · Forth Valley
EPS external wall insulation in Alloa
EPS external wall insulation in Alloa: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. We compare EPS against mineral wool for each Alloa enquiry rather than assuming one board suits every wall.
- Free survey in FK10 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Alloa
Postcode, service and a phone number is all we need.
What the job covers
- Grey graphite EPS reaches a given U-value with a thinner board
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
Local considerations in Alloa
We cover Alloa and nearby Stirling, Falkirk and Dunfermline. Alloa is about 6 miles from Stirling. East Central Scotland mixes stone tenements and terraces with post-war council housing and harled bungalows and semis.
Exposure to wind-driven rain varies across Forth Valley: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Alloa.
- Postcode district
- FK10
- County or area
- Forth Valley
- Nation
- Scotland
- Nearby
- Stirling, Falkirk, Dunfermline, Cumbernauld
Approvals in Scotland
In Scotland, permitted development for external wall changes is narrower, so in Alloa we check with the council's planning team where the appearance changes, and always for flats, tenements and conservation areas.
Over-cladding work in Scotland often needs a building warrant from the council's building standards service, with Section 6 of the Technical Handbooks setting insulation benchmarks.
When is EPS the right choice?
EPS suits most two-storey houses, bungalows and park homes where the wall is sound and there are no fire-height restrictions. It is a good fit where eaves are shallow, because grey EPS can hit the target with less thickness. On buildings with a storey 11 metres or more above ground, or where the guidance asks for non-combustible materials, mineral wool is used instead.
EPS external wall insulation prices in Alloa
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
EPS insulation in Alloa: questions
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
Do you cover Alloa?
Yes — we survey and quote EPS external wall insulation in Alloa (FK10) and nearby Stirling, Falkirk and Dunfermline, with a fixed written price before any work starts.