EPS insulation · Perth and Kinross
EPS external wall insulation in Crieff
Quotes for EPS external wall insulation in Crieff list the system, the detailing and the VAT position in writing, so you know exactly what's included. Where eaves are shallow on a house in Crieff, grey EPS can sometimes avoid the cost of extending the roofline.
- Free survey in PH7 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Crieff
Postcode, service and a phone number is all we need.
What the job covers
- Thermal conductivity around 0.031–0.038 W/mK depending on grade
- Used on low-rise houses; combustible, so not for taller buildings
- Easy to shape around bays, arches and reveals
- Grey graphite EPS reaches a given U-value with a thinner board
Local considerations in Crieff
As well as Crieff itself, we quote in Perth, Alloa and Stirling. Crieff sits around 16 miles from Perth. Tayside has stone tenements and terraces in the towns, harled cottages and post-war estates.
Exposure to wind-driven rain varies across Perth and Kinross: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
We compare EPS against mineral wool for each Crieff enquiry rather than assuming one board suits every wall.
- Postcode district
- PH7
- County or area
- Perth and Kinross
- Nation
- Scotland
- Nearby
- Perth, Alloa, Stirling, Blairgowrie
Permissions in Scotland
For Crieff properties, flats and tenements need planning permission for external insulation, and a noticeable change of finish on a house often does too under Scottish rules.
Over-cladding work in Scotland often needs a building warrant from the council's building standards service, with Section 6 of the Technical Handbooks setting insulation benchmarks.
What is EPS insulation?
Expanded polystyrene is a closed-cell foam made from beads that are expanded and moulded into boards. White EPS is the standard grade; grey EPS has graphite added, which reflects radiant heat and improves performance by roughly 15–20%, so a thinner board does the same job. Both are used inside certified render systems where the board, adhesive, fixings, mesh and finish are tested together by the manufacturer.
EPS external wall insulation prices in Crieff
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Crieff: questions
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Do you cover Crieff?
Yes — we survey and quote EPS external wall insulation in Crieff (PH7) and nearby Perth, Alloa and Stirling, with a fixed written price before any work starts.