EPS insulation · Northumberland
EPS external wall insulation in Morpeth
If you're planning EPS external wall insulation in Morpeth, start with a free survey: we measure, check the walls and confirm planning and building control for your address. We compare EPS against mineral wool for each Morpeth enquiry rather than assuming one board suits every wall.
- Free survey in NE61 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Morpeth
Postcode, service and a phone number is all we need.
Part of every quote
- Finished in silicone, acrylic, mineral render or brick slip
- Used on low-rise houses; combustible, so not for taller buildings
- Light boards mean fewer fixings and a faster install
- Easy to shape around bays, arches and reveals
Morpeth: walls, weather and approvals
As well as Morpeth itself, we quote in Ashington, Cramlington and Blyth. Morpeth is about 8 miles from Blyth. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across Northumberland: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Where eaves are shallow on a house in Morpeth, grey EPS can sometimes avoid the cost of extending the roofline.
- Postcode district
- NE61
- County or area
- Northumberland
- Nation
- England
- Nearby
- Ashington, Cramlington, Blyth, Gosforth
Approvals in England
Planning in Morpeth follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Morpeth
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
EPS insulation in Morpeth: questions
How long does EPS last on a wall?
The board itself doesn't degrade when protected by the render system. Service life depends on the render, sealants and detailing, typically 25–30 years or more with maintenance.
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Do you cover Morpeth?
Yes — we survey and quote EPS external wall insulation in Morpeth (NE61) and nearby Ashington, Cramlington and Blyth, with a fixed written price before any work starts.