Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Flats and blocks · Hampshire

EWI for flats and blocks in Totton

We quote EWI for flats and blocks for homes in Totton (SO40) and nearby Southampton and Hythe, with guide prices online and a free survey to fix the price. On mixed-tenure blocks in Totton, we agree access and resident notices with the managing agent before scaffold goes up.

  • Free survey in SO40 and nearby
  • Guide price from £110 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Totton

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Cavity barriers and fire-stopping detailed at compartment floors
  • We work with managing agents on resident communication
  • Higher-risk buildings follow the Building Safety Regulator's process in England
  • Mineral wool systems where building height or guidance requires them
A five-storey block of flats half re-clad in white and grey insulated render, with scaffolding on the brick half

Before we quote in Totton

Surveys in Totton also cover the surrounding SO40 district and towns such as Southampton and Hythe. It's roughly 4 miles from Totton to Southampton, the largest town in Hampshire. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Exposure to wind-driven rain varies across Hampshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For blocks in Totton, we start with height, storeys and the planning position, because those decide the system.

Postcode district
SO40
County or area
Hampshire
Nation
England
Nearby
Southampton, Hythe, Eastleigh, Winchester

Permissions in England

Planning in Totton follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

What fire-safety rules apply?

For blocks with a storey 11 metres or more above ground, guidance points to external wall materials of limited combustibility, and combustible materials are banned in the external walls of relevant buildings 18 metres and over in England. Higher-risk buildings (18 metres or seven storeys and above, with at least two homes) go through the Building Safety Regulator. We specify non-combustible systems wherever these apply and tell you at enquiry stage if a building is outside our scope.

EWI for flats and blocks prices in Totton

EWI for flats and blocks guide prices
ItemGuide priceNotes
Mineral wool system on a low-rise block£110–£190 per m²0% VATPriced on survey
Scaffold and accessPriced per buildingIncludes licences where needed
Specification and pricing pack for consultationIncluded with quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Flats and blocks in Totton: questions

Who pays for EWI on a leasehold block?

In England and Wales, usually the leaseholders through the service charge, depending on the lease, and the landlord must follow the Section 20 consultation process for major works.

Can one flat have external wall insulation on its own?

Rarely. The outside walls are usually owned by the freeholder, the result would look patchy, and planning is unlikely. Whole-building schemes are the norm.

Do flats need planning permission for EWI?

Yes. Permitted development rights for external alterations apply to houses, not flats or maisonettes, so an application is needed.

Do you cover Totton?

Yes — we survey and quote EWI for flats and blocks in Totton (SO40) and nearby Southampton, Hythe and Eastleigh, with a fixed written price before any work starts.

Flats and blocks in Totton

Start with a guide price, then fix it with a free survey in Totton.

Call freeGet a quote