Lime render · Kent
Lime render in Margate
If you're planning lime render in Margate, start with a free survey: we measure, check the walls and confirm planning and building control for your address. Lime work in Margate is scheduled for frost-free months so the render cures properly.
- Free survey in CT9 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Margate
Postcode, service and a phone number is all we need.
What you get
- Helps walls dry out where cement render trapped moisture
- Slower curing — needs frost-free, protected conditions
- Works with wood fibre insulation as a breathable EWI system
- Often appropriate in conservation settings
What we look for in Margate
We also cover Broadstairs and Ramsgate, close to Margate. It's roughly 38 miles from Margate to Maidstone, the largest town in Kent. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For period homes in Margate, we look for cement patching that may be trapping moisture before suggesting lime.
- Postcode district
- CT9
- County or area
- Kent
- Nation
- England
- Nearby
- Broadstairs, Ramsgate, Deal, Herne Bay
England: planning and regulations
Planning in Margate follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is lime render applied?
Old cement render is removed where it's causing problems, the wall is dampened, and lime is applied in successive coats — usually a scratch coat, a float coat and a finish coat — with curing time between. Freshly applied lime must be protected from frost, rain and fast drying.
Lime render prices in Margate
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Lime render in Margate: questions
Does lime render need painting?
Traditionally it's limewashed, which is breathable. Modern masonry paints can block vapour, so we'd avoid them.
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Do you cover Margate?
Yes — we survey and quote lime render in Margate (CT9) and nearby Broadstairs, Ramsgate and Deal, with a fixed written price before any work starts.