Silicone render · Kent
Silicone render in Margate
Quotes for silicone render in Margate list the system, the detailing and the VAT position in writing, so you know exactly what's included. Silicone suits most rendering jobs in Margate, either on its own or over insulation.
- Free survey in CT9 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Margate
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so walls can still breathe
- Water-repellent surface that dries quickly after rain
- Fine, even grain from about 1–2mm
- Used as the finish on most EWI systems
Local considerations in Margate
Surveys in Margate also cover the surrounding CT9 district and towns such as Broadstairs and Ramsgate. Margate is about 38 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in Margate, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- CT9
- County or area
- Kent
- Nation
- England
- Nearby
- Broadstairs, Ramsgate, Deal, Herne Bay
Planning and building control in England
Planning in Margate follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Margate
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Margate: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Margate?
Yes — we survey and quote silicone render in Margate (CT9) and nearby Broadstairs, Ramsgate and Deal, with a fixed written price before any work starts.