Silicone render · Kent
Silicone render in Herne Bay
From Herne Bay to Whitstable, we price silicone render after a measured survey — no guesswork, and no work starts until the price is agreed in writing. If you're re-rendering in Herne Bay, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in CT6 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Herne Bay
Postcode, service and a phone number is all we need.
Part of every quote
- Can also go straight onto prepared masonry
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
- Vapour-open, so walls can still breathe
Herne Bay: walls, weather and approvals
Surveys in Herne Bay also cover the surrounding CT6 district and towns such as Whitstable and Canterbury. Herne Bay sits around 27 miles from Maidstone. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Kent sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Herne Bay, either on its own or over insulation.
- Postcode district
- CT6
- County or area
- Kent
- Nation
- England
- Nearby
- Whitstable, Canterbury, Margate, Ramsgate
England: planning and regulations
Planning in Herne Bay follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Herne Bay
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Herne Bay: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Herne Bay?
Yes — we survey and quote silicone render in Herne Bay (CT6) and nearby Whitstable, Canterbury and Margate, with a fixed written price before any work starts.