Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · County Durham

Mineral wool external wall insulation in Peterlee

From Peterlee to Seaham, we price mineral wool external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. Older solid-walled homes in Peterlee can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in SR8 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Peterlee

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Better sound reduction than foam boards
  • Vapour-open, so moisture in solid walls can dry outwards
  • Heavier than EPS, so more fixings and careful handling
  • Finished in mineral or silicone render, or brick slip
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Before we quote in Peterlee

We also cover Seaham and Hartlepool, close to Peterlee. It's roughly 18 miles from Peterlee to Darlington, the largest town in County Durham. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.

Exposure to wind-driven rain varies across County Durham: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For homes in Peterlee near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
SR8
County or area
County Durham
Nation
England
Nearby
Seaham, Hartlepool, Houghton-le-Spring, Durham

Approvals in England

Planning in Peterlee follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Peterlee

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Peterlee: questions

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Peterlee?

Yes — we survey and quote mineral wool external wall insulation in Peterlee (SR8) and nearby Seaham, Hartlepool and Houghton-le-Spring, with a fixed written price before any work starts.

Mineral wool EWI in Peterlee

Send your postcode and we'll arrange a survey in Peterlee.

Call freeGet a quote