EPS insulation · County Durham
EPS external wall insulation in Peterlee
Homeowners and landlords in Peterlee can get a free survey and a fixed written quote for EPS external wall insulation, covering SR8 and the surrounding area. We compare EPS against mineral wool for each Peterlee enquiry rather than assuming one board suits every wall.
- Free survey in SR8 and nearby
- Guide price from £105 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Peterlee
Postcode, service and a phone number is all we need.
What you get
- Easy to shape around bays, arches and reveals
- Used on low-rise houses; combustible, so not for taller buildings
- Light boards mean fewer fixings and a faster install
- Finished in silicone, acrylic, mineral render or brick slip
Peterlee: walls, weather and approvals
As well as Peterlee itself, we quote in Seaham, Hartlepool and Houghton-le-Spring. Peterlee sits around 18 miles from Darlington. The North East has many solid brick terraces, including former colliery housing, plus post-war council estates with some system-built homes.
Exposure to wind-driven rain varies across County Durham: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
EPS is a common choice for two-storey houses, mainly on cost and weight, and we price it alongside mineral wool for homes in Peterlee.
- Postcode district
- SR8
- County or area
- County Durham
- Nation
- England
- Nearby
- Seaham, Hartlepool, Houghton-le-Spring, Durham
Approvals in England
Before quoting in Peterlee, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How thick does the board need to be?
On a 225mm solid brick wall, around 90mm of grey EPS or 100–110mm of white EPS typically gets close to 0.30 W/m²K. Stone walls, concrete panels and hollow-block walls start from different points, so the system supplier's calculation for your wall sets the final thickness.
EPS external wall insulation prices in Peterlee
| Item | Guide price | Notes |
|---|---|---|
| EPS + silicone render | £105–£145 per m²0% VAT | Excluding scaffold |
| Grey EPS uplift | +£4–£8 per m²0% VAT | Thinner board for the same U-value |
| Bungalow, full house | £6,700–£12,8000% VAT | 55–75 m² of wall, including scaffold |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
EPS insulation in Peterlee: questions
White or grey EPS?
Grey graphite EPS insulates better per millimetre, so it is the pick where space is tight at the eaves or around windows. White EPS is slightly cheaper and works well where the extra thickness isn't a problem.
Is EPS insulation safe on a house?
EPS is used inside render systems that are fire-tested as a whole. On low-rise houses it is widely used. On taller buildings, or where guidance calls for non-combustible materials, mineral wool systems are specified instead.
Will woodpeckers damage EPS?
It happens occasionally, especially near woodland. Damage is to the render and board surface and is repaired with a mesh patch and colour-matched finish.
Do you cover Peterlee?
Yes — we survey and quote EPS external wall insulation in Peterlee (SR8) and nearby Seaham, Hartlepool and Houghton-le-Spring, with a fixed written price before any work starts.