Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Devon

Mineral wool external wall insulation in Exmouth

Quotes for mineral wool external wall insulation in Exmouth list the system, the detailing and the VAT position in writing, so you know exactly what's included. On blocks and taller buildings in Exmouth, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in EX8 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Exmouth

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What the job covers

  • Better sound reduction than foam boards
  • Vapour-open, so moisture in solid walls can dry outwards
  • Used on blocks of flats and buildings with storeys above 11m
  • Heavier than EPS, so more fixings and careful handling
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Exmouth: walls, weather and approvals

We cover Exmouth and nearby Exeter, Newton Abbot and Torquay. It's roughly 37 miles from Exmouth to Plymouth, the largest town in Devon. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Parts of Devon fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

Older solid-walled homes in Exmouth can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

Postcode district
EX8
County or area
Devon
Nation
England
Nearby
Exeter, Newton Abbot, Torquay, Paignton

England: planning and regulations

Planning in Exmouth follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Why choose mineral wool over EPS?

Two reasons come up most: fire and moisture. Mineral wool doesn't burn, which is why guidance for taller residential buildings points to non-combustible external wall materials. It is also vapour-open, so a solid wall that holds some moisture can keep drying outwards through the insulation and render.

The trade-offs are weight and cost. Slabs are denser, need more fixings and take longer to install, so the price per m² is higher than EPS.

Mineral wool external wall insulation prices in Exmouth

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Mineral wool EWI in Exmouth: questions

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Do you cover Exmouth?

Yes — we survey and quote mineral wool external wall insulation in Exmouth (EX8) and nearby Exeter, Newton Abbot and Torquay, with a fixed written price before any work starts.

Mineral wool EWI in Exmouth

Book a free survey in Exmouth — no obligation.

Call freeGet a quote