Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Devon

Mineral wool external wall insulation in Torquay

Mineral wool external wall insulation in Torquay: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. Older solid-walled homes in Torquay can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

  • Free survey in TQ2 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Torquay

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Vapour-open, so moisture in solid walls can dry outwards
  • Finished in mineral or silicone render, or brick slip
  • Used on blocks of flats and buildings with storeys above 11m
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Torquay: walls, weather and approvals

Surveys in Torquay also cover the surrounding TQ2 district and towns such as Paignton and Newton Abbot. Torquay is about 28 miles from Plymouth. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Parts of Devon fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

For homes in Torquay near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
TQ2
County or area
Devon
Nation
England
Nearby
Paignton, Newton Abbot, Exmouth, Exeter

Approvals in England

Planning in Torquay follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Is mineral wool required on my building?

For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.

Mineral wool external wall insulation prices in Torquay

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Mineral wool EWI in Torquay: questions

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Torquay?

Yes — we survey and quote mineral wool external wall insulation in Torquay (TQ2) and nearby Paignton, Newton Abbot and Exmouth, with a fixed written price before any work starts.

Mineral wool EWI in Torquay

Start with a guide price, then fix it with a free survey in Torquay.

Call freeGet a quote