Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Devon

Mineral wool external wall insulation in Paignton

From Paignton to Torquay, we price mineral wool external wall insulation after a measured survey — no guesswork, and no work starts until the price is agreed in writing. On blocks and taller buildings in Paignton, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in TQ3 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Paignton

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What's included

  • Vapour-open, so moisture in solid walls can dry outwards
  • Non-combustible board (typically Euroclass A1 or A2-s1,d0 as part of the system)
  • Finished in mineral or silicone render, or brick slip
  • Heavier than EPS, so more fixings and careful handling
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Paignton: walls, weather and approvals

We cover Paignton and nearby Torquay, Newton Abbot and Exmouth. It's roughly 26 miles from Paignton to Plymouth, the largest town in Devon. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.

Parts of Devon fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.

For homes in Paignton near busy roads, mineral wool's sound reduction can be a reason to choose it.

Postcode district
TQ3
County or area
Devon
Nation
England
Nearby
Torquay, Newton Abbot, Exmouth, Exeter

Planning and building control in England

Planning in Paignton follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

Building control applies once more than half of a wall is insulated or re-rendered, or more than a quarter of the whole building envelope, and your written quote says how that's handled.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Is mineral wool required on my building?

For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.

Mineral wool external wall insulation prices in Paignton

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Tell us about the property

    Use the quote tool or form, or call. Photos help.

  2. Free survey

    We measure, check the walls and confirm approvals.

  3. Fixed written quote

    System, details, access, exclusions and VAT in writing.

  4. Installation

    Scheduled for suitable weather, with a clear programme.

Mineral wool EWI in Paignton: questions

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Do you cover Paignton?

Yes — we survey and quote mineral wool external wall insulation in Paignton (TQ3) and nearby Torquay, Newton Abbot and Exmouth, with a fixed written price before any work starts.

Mineral wool EWI in Paignton

Get a free survey and fixed written price for mineral wool external wall insulation in Paignton.

Call freeGet a quote