Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Greater London

Mineral wool external wall insulation in Romford

If you're planning mineral wool external wall insulation in Romford, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On blocks and taller buildings in Romford, mineral wool is the default because of the fire guidance for external walls.

  • Free survey in RM1 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Romford

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Used on blocks of flats and buildings with storeys above 11m
  • Heavier than EPS, so more fixings and careful handling
  • Vapour-open, so moisture in solid walls can dry outwards
  • Finished in mineral or silicone render, or brick slip
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Local considerations in Romford

We cover Romford and nearby Hornchurch, Dagenham and Becontree. London's housing includes a large stock of Victorian and Edwardian solid-wall terraces, inter-war semis and post-war blocks, and conservation areas cover many streets — so planning is often the first question for external work.

Much of Greater London sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

Older solid-walled homes in Romford can suit a vapour-open mineral wool build-up better than foam; the survey checks the wall first.

Postcode district
RM1
County or area
Greater London
Nation
England
Nearby
Hornchurch, Dagenham, Becontree, Ilford

Permissions in England

For a house in Romford, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

What about noise?

Dense mineral wool adds mass and absorbs sound, so homes beside main roads or railways often notice a quieter interior, particularly where windows are also upgraded. The improvement depends on the whole wall and windows, so we don't quote decibel figures without testing.

Mineral wool external wall insulation prices in Romford

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

What happens next

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Mineral wool EWI in Romford: questions

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool needed for a bungalow?

Rarely for fire reasons. It may still be chosen on a damp-prone solid wall where a vapour-open build-up is wanted.

Do you cover Romford?

Yes — we survey and quote mineral wool external wall insulation in Romford (RM1) and nearby Hornchurch, Dagenham and Becontree, with a fixed written price before any work starts.

Mineral wool EWI in Romford

Get a free survey and fixed written price for mineral wool external wall insulation in Romford.

Call freeGet a quote