Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Mineral wool EWI · Surrey

Mineral wool external wall insulation in Reigate

Homeowners and landlords in Reigate can get a free survey and a fixed written quote for mineral wool external wall insulation, covering RH2 and the surrounding area. For homes in Reigate near busy roads, mineral wool's sound reduction can be a reason to choose it.

  • Free survey in RH2 and nearby
  • Guide price from £125 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Reigate

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • Vapour-open, so moisture in solid walls can dry outwards
  • Used on blocks of flats and buildings with storeys above 11m
  • Finished in mineral or silicone render, or brick slip
  • Better sound reduction than foam boards
Mineral wool insulation slabs fixed to the wall of a low-rise block of flats behind scaffolding with debris netting

Local considerations in Reigate

We cover Reigate and nearby Redhill, Horley and Banstead. Reigate is about 16 miles from Woking. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.

Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

On blocks and taller buildings in Reigate, mineral wool is the default because of the fire guidance for external walls.

Postcode district
RH2
County or area
Surrey
Nation
England
Nearby
Redhill, Horley, Banstead, Caterham

Planning and building control in England

For a house in Reigate, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

On residential buildings with a storey 11 metres or more above ground, guidance points to non-combustible external wall materials, and combustible materials are banned in relevant buildings 18 metres and over, so we specify mineral wool systems there.

Is mineral wool required on my building?

For most two-storey houses it's a choice rather than a requirement. In England, regulation 7(2) bans combustible materials in the external walls of 'relevant buildings' 18 metres and over, and the Approved Document B guidance also covers residential buildings with a storey at 11 metres or more. Wales has its own amended rules, and Scotland restricts combustible cladding on buildings with a storey more than 11 metres above ground. We specify mineral wool wherever these apply and confirm the system's fire classification in writing.

Mineral wool external wall insulation prices in Reigate

Mineral wool external wall insulation guide prices
ItemGuide priceNotes
Mineral wool + mineral or silicone render£125–£170 per m²0% VATExcluding scaffold
Mineral wool + brick slip£195–£260 per m²0% VATHeavier slip systems need extra fixings
Three-bed semi, full house£11,800–£20,2000% VAT80–100 m² of wall, including scaffold

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Get a guide price

    Try the online quote tool for a ballpark figure.

  2. Book the survey

    A visit at a time that suits you.

  3. Agree the quote

    Nothing starts until you've signed the written price.

  4. We do the work

    Planned around weather, with you kept informed.

Mineral wool EWI in Reigate: questions

Can mineral wool EWI have a brick finish?

Yes. Brick slips can be bonded over mineral wool systems designed for them, with additional fixings for the extra weight.

Is mineral wool better than EPS?

Not always better — different. Mineral wool wins on fire performance, breathability and acoustics; EPS wins on cost, weight and thinner boards for the same U-value. The wall, the building height and your priorities decide it.

Does mineral wool get wet?

It is water-repellent and protected by the render system. Like any insulation it must not be left exposed to rain during installation, so boards are covered and work stops in wet weather.

Do you cover Reigate?

Yes — we survey and quote mineral wool external wall insulation in Reigate (RH2) and nearby Redhill, Horley and Banstead, with a fixed written price before any work starts.

Mineral wool EWI in Reigate

Book a free survey in Reigate — no obligation.

Call freeGet a quote