Silicone render · Essex
Silicone render in Maldon
Silicone render in Maldon: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. If you're re-rendering in Maldon, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in CM9 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Maldon
Postcode, service and a phone number is all we need.
Included as standard
- Used as the finish on most EWI systems
- Can also go straight onto prepared masonry
- Water-repellent surface that dries quickly after rain
- Through-coloured — no painting needed
Before we quote in Maldon
Surveys in Maldon also cover the surrounding CM9 district and towns such as Witham and Chelmsford. Maldon is about 13 miles from Southend-on-Sea. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Essex sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On tree-shaded or north-facing walls in Maldon, silicone's water repellence helps it stay cleaner for longer.
- Postcode district
- CM9
- County or area
- Essex
- Nation
- England
- Nearby
- Witham, Chelmsford, Rayleigh, Wickford
Planning and building control in England
Planning in Maldon follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Maldon
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Maldon: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Maldon?
Yes — we survey and quote silicone render in Maldon (CM9) and nearby Witham, Chelmsford and Rayleigh, with a fixed written price before any work starts.