Silicone render · Gloucestershire
Silicone render in Kingswood
We quote silicone render for homes in Kingswood (BS15) and nearby Mangotsfield and Yate, with guide prices online and a free survey to fix the price. If you're re-rendering in Kingswood, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in BS15 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Kingswood
Postcode, service and a phone number is all we need.
Part of every quote
- Vapour-open, so walls can still breathe
- Through-coloured — no painting needed
- Can also go straight onto prepared masonry
- Fine, even grain from about 1–2mm
Kingswood: walls, weather and approvals
We cover Kingswood and nearby Mangotsfield, Yate and Chipping Sodbury. Kingswood sits around 31 miles from Gloucester. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Gloucestershire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Kingswood, either on its own or over insulation.
- Postcode district
- BS15
- County or area
- Gloucestershire
- Nation
- England
- Nearby
- Mangotsfield, Yate, Chipping Sodbury, Bath
Approvals in England
Planning in Kingswood follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Kingswood
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Kingswood: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Kingswood?
Yes — we survey and quote silicone render in Kingswood (BS15) and nearby Mangotsfield, Yate and Chipping Sodbury, with a fixed written price before any work starts.