Silicone render · Gloucestershire
Silicone render in Yate
From Yate to Chipping Sodbury, we price silicone render after a measured survey — no guesswork, and no work starts until the price is agreed in writing. On tree-shaded or north-facing walls in Yate, silicone's water repellence helps it stay cleaner for longer.
- Free survey in BS37 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Yate
Postcode, service and a phone number is all we need.
What you get
- Can also go straight onto prepared masonry
- Water-repellent surface that dries quickly after rain
- Used as the finish on most EWI systems
- Through-coloured — no painting needed
Homes and walls in Yate
We also cover Chipping Sodbury and Mangotsfield, close to Yate. It's roughly 24 miles from Yate to Gloucester, the largest town in Gloucestershire. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Gloucestershire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
If you're re-rendering in Yate, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- BS37
- County or area
- Gloucestershire
- Nation
- England
- Nearby
- Chipping Sodbury, Mangotsfield, Kingswood, Bath
Approvals in England
For a house in Yate, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Yate
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Yate: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Yate?
Yes — we survey and quote silicone render in Yate (BS37) and nearby Chipping Sodbury, Mangotsfield and Kingswood, with a fixed written price before any work starts.