Silicone render · Surrey
Silicone render in Leatherhead
Looking for silicone render in Leatherhead? We survey homes across Leatherhead and the KT22 area, then give you a fixed written price before any work starts. If you're re-rendering in Leatherhead, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in KT22 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Leatherhead
Postcode, service and a phone number is all we need.
Part of every quote
- Through-coloured — no painting needed
- Water-repellent surface that dries quickly after rain
- Vapour-open, so walls can still breathe
- Used as the finish on most EWI systems
Leatherhead: walls, weather and approvals
As well as Leatherhead itself, we quote in Epsom, Esher and Banstead. It's roughly 10 miles from Leatherhead to Woking, the largest town in Surrey. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Surrey sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Leatherhead, either on its own or over insulation.
- Postcode district
- KT22
- County or area
- Surrey
- Nation
- England
- Nearby
- Epsom, Esher, Banstead, Surbiton
Permissions in England
Planning in Leatherhead follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Is silicone render maintenance-free?
Not quite. It stays cleaner than most renders because water runs off and dries quickly, but north-facing or tree-shaded walls can still gather algae. A gentle biocide wash every few years keeps it looking new. Pressure washing is avoided because it can damage the surface.
Silicone render prices in Leatherhead
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Leatherhead: questions
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Leatherhead?
Yes — we survey and quote silicone render in Leatherhead (KT22) and nearby Epsom, Esher and Banstead, with a fixed written price before any work starts.