Silicone render · Worcestershire
Silicone render in Kidderminster
Looking for silicone render in Kidderminster? We survey homes across Kidderminster and the DY10 area, then give you a fixed written price before any work starts. If you're re-rendering in Kidderminster, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in DY10 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Kidderminster
Postcode, service and a phone number is all we need.
What you get
- Fine, even grain from about 1–2mm
- Through-coloured — no painting needed
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
Kidderminster: walls, weather and approvals
We also cover Stourport-on-Severn and Stourbridge, close to Kidderminster. Kidderminster is about 14 miles from Worcester. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of Worcestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Kidderminster, either on its own or over insulation.
- Postcode district
- DY10
- County or area
- Worcestershire
- Nation
- England
- Nearby
- Stourport-on-Severn, Stourbridge, Kingswinford, Brierley Hill
Approvals in England
For a house in Kidderminster, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Kidderminster
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Kidderminster: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Kidderminster?
Yes — we survey and quote silicone render in Kidderminster (DY10) and nearby Stourport-on-Severn, Stourbridge and Kingswinford, with a fixed written price before any work starts.