Silicone render · Worcestershire
Silicone render in Stourport-on-Severn
Need silicone render in Stourport-on-Severn? Tell us about the property and we'll arrange a free survey and a written quote. On tree-shaded or north-facing walls in Stourport-on-Severn, silicone's water repellence helps it stay cleaner for longer.
- Free survey in DY13 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Stourport-on-Severn
Postcode, service and a phone number is all we need.
What's included
- Water-repellent surface that dries quickly after rain
- Used as the finish on most EWI systems
- Vapour-open, so walls can still breathe
- Fine, even grain from about 1–2mm
Homes and walls in Stourport-on-Severn
Surveys in Stourport-on-Severn also cover the surrounding DY13 district and towns such as Kidderminster and Droitwich. Stourport-on-Severn sits around 11 miles from Worcester. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of Worcestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in Stourport-on-Severn, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- DY13
- County or area
- Worcestershire
- Nation
- England
- Nearby
- Kidderminster, Droitwich, Bromsgrove, Stourbridge
England: planning and regulations
Planning in Stourport-on-Severn follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Stourport-on-Severn
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Stourport-on-Severn: questions
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Do you cover Stourport-on-Severn?
Yes — we survey and quote silicone render in Stourport-on-Severn (DY13) and nearby Kidderminster, Droitwich and Bromsgrove, with a fixed written price before any work starts.