Silicone render · Worcestershire
Silicone render in Worcester
We quote silicone render for homes in Worcester (WR1) and nearby Droitwich and Malvern, with guide prices online and a free survey to fix the price. If you're re-rendering in Worcester, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in WR1 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Worcester
Postcode, service and a phone number is all we need.
What you get
- Through-coloured — no painting needed
- Used as the finish on most EWI systems
- Can also go straight onto prepared masonry
- Vapour-open, so walls can still breathe
Worcester: walls, weather and approvals
We cover Worcester and nearby Droitwich, Malvern and Stourport-on-Severn. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of Worcestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
Silicone suits most rendering jobs in Worcester, either on its own or over insulation.
- Postcode district
- WR1
- County or area
- Worcestershire
- Nation
- England
- Nearby
- Droitwich, Malvern, Stourport-on-Severn, Bromsgrove
England: planning and regulations
Planning in Worcester follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Worcester
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Silicone render in Worcester: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Worcester?
Yes — we survey and quote silicone render in Worcester (WR1) and nearby Droitwich, Malvern and Stourport-on-Severn, with a fixed written price before any work starts.