Silicone render · Worcestershire
Silicone render in Malvern
If you're planning silicone render in Malvern, start with a free survey: we measure, check the walls and confirm planning and building control for your address. On tree-shaded or north-facing walls in Malvern, silicone's water repellence helps it stay cleaner for longer.
- Free survey in WR14 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Malvern
Postcode, service and a phone number is all we need.
What you get
- Used as the finish on most EWI systems
- Fine, even grain from about 1–2mm
- Vapour-open, so walls can still breathe
- Can also go straight onto prepared masonry
Local considerations in Malvern
We cover Malvern and nearby Worcester, Droitwich and Stourport-on-Severn. It's roughly 7 miles from Malvern to Worcester, the largest town in Worcestershire. The West Midlands has large numbers of Victorian and Edwardian terraces, inter-war semis and post-war council estates, including concrete and steel-framed house types.
Much of Worcestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
If you're re-rendering in Malvern, we'll show you what adding insulation under the silicone would cost at the same time.
- Postcode district
- WR14
- County or area
- Worcestershire
- Nation
- England
- Nearby
- Worcester, Droitwich, Stourport-on-Severn, Evesham
England: planning and regulations
For a house in Malvern, external insulation or render is often permitted development if it looks similar to the existing walls; conservation areas, flats, commercial buildings and listed buildings need permission or consent, so we check your address first.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
How is silicone render applied?
On masonry, the wall is prepared and any loose material removed. A base coat with glass-fibre mesh is applied over the whole wall to resist cracking, followed by a primer and the silicone finish, trowelled to its grain size. On EWI, the same base coat, primer and finish go over the insulation boards.
Silicone render prices in Malvern
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Silicone render in Malvern: questions
How long does silicone render take to dry?
It's touch-dry within hours but needs dry weather above about 5°C for the first day or two to cure properly.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Do you cover Malvern?
Yes — we survey and quote silicone render in Malvern (WR14) and nearby Worcester, Droitwich and Stourport-on-Severn, with a fixed written price before any work starts.