Solid wall insulation · Berkshire
Solid wall insulation in Slough
Looking for solid wall insulation in Slough? We survey homes across Slough and the SL1 area, then give you a fixed written price before any work starts. On solid-walled houses in Slough, the gable or the most weather-exposed wall is often the place to start.
- Free survey in SL1 and nearby
- Guide price from £75 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Slough
Postcode, service and a phone number is all we need.
Part of every quote
- Breathable options for stone and lime-mortared walls
- Both can be done in stages, elevation by elevation or room by room
- Internal insulation suits single rooms or where the outside can't change
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
Slough: walls, weather and approvals
Surveys in Slough also cover the surrounding SL1 district and towns such as Windsor and Maidenhead. Slough sits around 17 miles from Reading. Homes across the South East range from inter-war semis and post-war estates, which are mostly cavity-walled, to older solid-walled cottages and Victorian town terraces.
Much of Berkshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For solid-walled homes in Slough, we check wall thickness and age first to confirm there's no cavity to fill.
- Postcode district
- SL1
- County or area
- Berkshire
- Nation
- England
- Nearby
- Windsor, Maidenhead, Gerrards Cross, Uxbridge
Permissions in England
Before quoting in Slough, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.
What does solid wall insulation cost?
External systems run at roughly £105–£210 per m² of wall depending on the board and finish. Internal insulation is roughly £75–£130 per m², plus the cost of moving radiators, sockets and kitchen units.
Solid wall insulation prices in Slough
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in Slough: questions
Can I get a grant for solid wall insulation?
Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Do you cover Slough?
Yes — we survey and quote solid wall insulation in Slough (SL1) and nearby Windsor, Maidenhead and Gerrards Cross, with a fixed written price before any work starts.