Solid wall insulation · England
Solid wall insulation in East Riding of Yorkshire
Planning solid wall insulation anywhere in East Riding of Yorkshire? We cover towns including Hull and Bridlington, and check planning and building control for each address. On solid-walled houses in East Riding of Yorkshire, the gable or the most weather-exposed wall is often the place to start.
- Free survey and fixed written price
- Guide price from £75 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in East Riding of Yorkshire
Tell us the postcode and what you need.
What the job covers
- Breathable options for stone and lime-mortared walls
- External insulation keeps room sizes and treats cold bridges well
- Both can be done in stages, elevation by elevation or room by room
- In England and Wales, Building Regulations apply when more than half of a wall is treated
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
What we look for in East Riding of Yorkshire
Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.
Much of East Riding of Yorkshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
On solid-walled houses in East Riding of Yorkshire, the gable or the most weather-exposed wall is often the place to start.
- Nation
- England
- Region
- Yorkshire and the Humber
- Towns covered
- Hull, Bridlington, Beverley, Goole
- Guide price
- From £75 per m² + scaffold · 0% VAT
Planning and building control in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
What does solid wall insulation cost?
External systems run at roughly £105–£210 per m² of wall depending on the board and finish. Internal insulation is roughly £75–£130 per m², plus the cost of moving radiators, sockets and kitchen units.
Solid wall insulation prices in East Riding of Yorkshire
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Solid wall insulation in East Riding of Yorkshire: questions
Does solid wall insulation cause condensation?
It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.
Is solid wall insulation worth it?
For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Do you cover all of East Riding of Yorkshire?
Yes. We survey and quote solid wall insulation across East Riding of Yorkshire, including Hull, Bridlington, Beverley, Goole.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.