Solid wall insulation · England
Solid wall insulation in South Yorkshire
Solid wall insulation across South Yorkshire: measured survey, clear specification and a fixed written price before any work starts. On solid-walled houses in South Yorkshire, the gable or the most weather-exposed wall is often the place to start.
- Free survey and fixed written price
- Guide price from £75 per m² + scaffold, 0% VAT
- Planning and building control checked for England
Free survey in South Yorkshire
Tell us the postcode and what you need.
Part of every quote
- Internal insulation suits single rooms or where the outside can't change
- Solid walls can lose heat roughly twice as fast as an insulated cavity wall
- In England and Wales, Building Regulations apply when more than half of a wall is treated
- External insulation keeps room sizes and treats cold bridges well
- Breathable options for stone and lime-mortared walls
Before we quote in South Yorkshire
Yorkshire's housing includes stone and brick terraces, back-to-backs in parts of West Yorkshire, and post-war estates with steel-framed and concrete house types.
Exposure to wind-driven rain varies across South Yorkshire: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
For South Yorkshire homeowners weighing external against internal insulation, the survey sets out both with prices.
- Nation
- England
- Region
- Yorkshire and the Humber
- Towns covered
- Sheffield, Rotherham, Doncaster, Barnsley, Chapeltown
- Guide price
- From £75 per m² + scaffold · 0% VAT
Permissions in England
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. Planning permission is usually needed in conservation areas, National Parks, National Landscapes, the Broads and World Heritage Sites (where cladding a house in stone, artificial stone, pebble dash, render, timber, plastic or tiles isn't permitted development), for flats and maisonettes, for commercial buildings, under an Article 4 direction, or where the look changes noticeably. Listed buildings need listed building consent.
Renovating more than half of a wall's area — insulating it, or stripping and re-rendering it — or more than a quarter of the building's whole external envelope brings in the energy requirements of Part L, so building control needs to be involved and the wall should reach about 0.30 W/m²K where that's technically, functionally and economically feasible.
External or internal — which is better?
External insulation keeps the wall warm, reduces cold bridging at floors and party walls, renews the outside, and doesn't shrink rooms — but it changes the look and needs scaffolding. Internal insulation keeps the façade unchanged and can be done room by room, but loses 50–100mm of floor space per wall and needs careful detailing to avoid condensation at joists and corners.
Solid wall insulation prices in South Yorkshire
| Item | Guide price | Notes |
|---|---|---|
| External (EWI) | £105–£210 per m²0% VAT | By board and finish |
| Internal (IWI) | £75–£130 per m²0% VAT | Plus making good |
| Survey and written recommendation | Free with a quote |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
How it works
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Solid wall insulation in South Yorkshire: questions
Does solid wall insulation cause condensation?
It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.
Can I get a grant for solid wall insulation?
Some schemes cover it for eligible households — for example ECO4 until 31 December 2026, Home Energy Scotland's grant and loan, Wales' Warm Homes Nest and NI's Affordable Warmth Scheme. Each has its own eligibility and installer rules; see our grants guide.
Can I do one wall at a time?
Yes. Many owners start with the coldest or most exposed elevation, often a gable end.
Do you cover all of South Yorkshire?
Yes. We survey and quote solid wall insulation across South Yorkshire, including Sheffield, Rotherham, Doncaster, Barnsley, Chapeltown.
Do I need planning permission in England?
For houses, external wall insulation and render are often permitted development where the finish looks similar to the existing walls. We check your address before quoting.