Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Solid wall insulation · Greater Manchester

Solid wall insulation in Failsworth

We quote solid wall insulation for homes in Failsworth (M35) and nearby Droylsden and Ashton-under-Lyne, with guide prices online and a free survey to fix the price. On solid-walled houses in Failsworth, the gable or the most weather-exposed wall is often the place to start.

  • Free survey in M35 and nearby
  • Guide price from £75 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Failsworth

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

What you get

  • Internal insulation suits single rooms or where the outside can't change
  • Solid walls can lose heat roughly twice as fast as an insulated cavity wall
  • In England and Wales, Building Regulations apply when more than half of a wall is treated
  • Both can be done in stages, elevation by elevation or room by room
Victorian end-of-terrace house with dark insulation boards fixed to the lower half of the gable wall behind scaffolding

Before we quote in Failsworth

We cover Failsworth and nearby Droylsden, Ashton-under-Lyne and Oldham. It's roughly 3 miles from Failsworth to Manchester, the largest town in Greater Manchester. The North West has one of the largest stocks of pre-1919 solid-wall terraces in England, alongside Pennine stone houses and post-war estates.

Exposure to wind-driven rain varies across Greater Manchester: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.

For solid-walled homes in Failsworth, we check wall thickness and age first to confirm there's no cavity to fill.

Postcode district
M35
County or area
Greater Manchester
Nation
England
Nearby
Droylsden, Ashton-under-Lyne, Oldham, Manchester

England: planning and regulations

Planning in Failsworth follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

How can I tell if my walls are solid?

Measure the wall thickness at a window or door: about 225mm (9 inches) of brick usually means solid, while 260mm or more often means a cavity. On exposed brick, a pattern with bricks laid end-on (headers) every few courses points to solid construction. Stone walls are usually solid regardless of thickness. Age is a strong clue too — most homes built before the 1920s are solid-walled.

Solid wall insulation prices in Failsworth

Solid wall insulation guide prices
ItemGuide priceNotes
External (EWI)£105–£210 per m²0% VATBy board and finish
Internal (IWI)£75–£130 per m²0% VATPlus making good
Survey and written recommendationFree with a quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

From enquiry to finished wall

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Solid wall insulation in Failsworth: questions

Is solid wall insulation worth it?

For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.

Does solid wall insulation cause condensation?

It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.

Can I do one wall at a time?

Yes. Many owners start with the coldest or most exposed elevation, often a gable end.

Do you cover Failsworth?

Yes — we survey and quote solid wall insulation in Failsworth (M35) and nearby Droylsden, Ashton-under-Lyne and Oldham, with a fixed written price before any work starts.

Solid wall insulation in Failsworth

Send your postcode and we'll arrange a survey in Failsworth.

Call freeGet a quote