Free survey · Fixed written price · UK-wideCall free 0800 088 6248

Solid wall insulation · Leicestershire

Solid wall insulation in Market Harborough

Need solid wall insulation in Market Harborough? Tell us about the property and we'll arrange a free survey and a written quote. For Market Harborough homeowners weighing external against internal insulation, the survey sets out both with prices.

  • Free survey in LE16 and nearby
  • Guide price from £75 per m² + scaffold, 0% VAT
  • Fixed written price before work starts

Free survey in Market Harborough

Postcode, service and a phone number is all we need.

Enter a valid UK postcode.

Choose a service.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details only to respond to this enquiry. See our privacy notice.

Part of every quote

  • In England and Wales, Building Regulations apply when more than half of a wall is treated
  • External insulation keeps room sizes and treats cold bridges well
  • Breathable options for stone and lime-mortared walls
  • Internal insulation suits single rooms or where the outside can't change
Victorian end-of-terrace house with dark insulation boards fixed to the lower half of the gable wall behind scaffolding

Local considerations in Market Harborough

As well as Market Harborough itself, we quote in Corby, Kettering and Wigston. It's roughly 14 miles from Market Harborough to Leicester, the largest town in Leicestershire. Housing in the East Midlands includes Victorian terraces in the towns and cities, plenty of inter-war semis and post-war council estates, some of them system-built.

Much of Leicestershire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.

On solid-walled houses in Market Harborough, the gable or the most weather-exposed wall is often the place to start.

Postcode district
LE16
County or area
Leicestershire
Nation
England
Nearby
Corby, Kettering, Wigston, Oadby

Approvals in England

Planning in Market Harborough follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.

If the work covers more than half of a wall, or a quarter of the building's whole envelope, it counts as renovating a thermal element, with a target of about 0.30 W/m²K where feasible.

External or internal — which is better?

External insulation keeps the wall warm, reduces cold bridging at floors and party walls, renews the outside, and doesn't shrink rooms — but it changes the look and needs scaffolding. Internal insulation keeps the façade unchanged and can be done room by room, but loses 50–100mm of floor space per wall and needs careful detailing to avoid condensation at joists and corners.

Solid wall insulation prices in Market Harborough

Solid wall insulation guide prices
ItemGuide priceNotes
External (EWI)£105–£210 per m²0% VATBy board and finish
Internal (IWI)£75–£130 per m²0% VATPlus making good
Survey and written recommendationFree with a quote

Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.

How it works

  1. Enquiry

    Send your postcode and a few details.

  2. Measured survey

    Walls, damp, eaves, cills and services recorded.

  3. Written price

    A fixed price with the specification attached.

  4. Work and handover

    Installed, inspected and documents handed over.

Solid wall insulation in Market Harborough: questions

Does solid wall insulation cause condensation?

It can if detailed poorly, particularly internally. A condensation risk check for the proposed build-up and careful detailing at joists, reveals and corners avoid it.

Is solid wall insulation worth it?

For many solid-walled homes it's one of the biggest single improvements to comfort, because the walls are often the largest heat-loss area. Savings depend on the home and heating, so we don't promise a figure.

Can I do one wall at a time?

Yes. Many owners start with the coldest or most exposed elevation, often a gable end.

Do you cover Market Harborough?

Yes — we survey and quote solid wall insulation in Market Harborough (LE16) and nearby Corby, Kettering and Wigston, with a fixed written price before any work starts.

Solid wall insulation in Market Harborough

Start with a guide price, then fix it with a free survey in Market Harborough.

Call freeGet a quote