Wood fibre EWI · Cambridgeshire
Wood fibre insulation for older homes in Peterborough
Quotes for wood fibre external wall insulation in Peterborough list the system, the detailing and the VAT position in writing, so you know exactly what's included. If your home in Peterborough is in a conservation area, we check the council's position on render before suggesting wood fibre EWI.
- Free survey in PE1 and nearby
- Guide price from £150 per m² + scaffold, 0% VAT
- Fixed written price before work starts
Free survey in Peterborough
Postcode, service and a phone number is all we need.
Part of every quote
- High density gives good protection from summer heat
- Compatible with lime renders used on traditional buildings
- Vapour-open and hygroscopic — buffers moisture rather than trapping it
- Thicker than foam for the same U-value
Local considerations in Peterborough
We cover Peterborough and nearby Stamford, March and Spalding. The East of England has a mix of post-war estates, inter-war semis and older solid brick and flint cottages, with some system-built council homes on post-war estates.
Much of Cambridgeshire sits in the lower wind-driven rain exposure bands, which keeps the choice of finishes wide — though hilltop, coastal and exposed gable walls can still need a tougher specification, so we check the actual site.
For period homes in Peterborough, the survey looks closely at existing lime mortars and any cement patching that may trap moisture.
- Postcode district
- PE1
- County or area
- Cambridgeshire
- Nation
- England
- Nearby
- Stamford, March, Spalding, Huntingdon
Approvals in England
Planning in Peterborough follows England's national rules: similar-looking finishes on houses are usually permitted, while flats, commercial premises, conservation areas and streets under an Article 4 direction need an application.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
What finish goes over wood fibre?
A lime-based or mineral render designed for the system, applied over a reinforcing base coat. Lime finishes give the softer, slightly irregular texture that suits cottages and older terraces.
Wood fibre insulation for older homes prices in Peterborough
| Item | Guide price | Notes |
|---|---|---|
| Wood fibre + lime render system | £150–£210 per m²0% VAT | Excluding scaffold |
| Cottage, about 90 m² of wall | £15,300–£22,1000% VAT | Including scaffold |
| Lime render only (no insulation) | £78–£132 per m²inc VAT | See lime render |
Confirmed by a fixed written quote after survey. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027. Prices include VAT at 20%.
From enquiry to finished wall
Enquiry
Send your postcode and a few details.
Measured survey
Walls, damp, eaves, cills and services recorded.
Written price
A fixed price with the specification attached.
Work and handover
Installed, inspected and documents handed over.
Wood fibre EWI in Peterborough: questions
Is wood fibre worth the extra cost?
On older solid walls the main benefit is moisture safety rather than raw U-value. If the wall needs to breathe, the cheaper option can cost more later.
Is wood fibre insulation fireproof?
No — it's a timber product. It chars rather than flaming readily, but it is combustible, so it's used on low-rise buildings within a tested system and never where non-combustible materials are required.
Can wood fibre go on a stone wall?
Yes, after levelling. Rubble stone is often uneven, so a levelling coat or adapted fixing method is used first.
Do you cover Peterborough?
Yes — we survey and quote wood fibre external wall insulation in Peterborough (PE1) and nearby Stamford, March and Spalding, with a fixed written price before any work starts.