Lime render · West Glamorgan
Lime render in Port Talbot
Need lime render in Port Talbot? Tell us about the property and we'll arrange a free survey and a written quote. For stone and early brick properties in Port Talbot, lime render is often the right answer.
- Free survey in SA13 and nearby
- Guide price from £78 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Port Talbot
Postcode, service and a phone number is all we need.
What the job covers
- Slower curing — needs frost-free, protected conditions
- Helps walls dry out where cement render trapped moisture
- Works with wood fibre insulation as a breathable EWI system
- Often appropriate in conservation settings
Homes and walls in Port Talbot
As well as Port Talbot itself, we quote in Briton Ferry, Neath and Maesteg. Port Talbot sits around 7 miles from Swansea. South Wales has long runs of solid-wall valley terraces, Victorian and Edwardian town housing and post-war council estates.
Parts of West Glamorgan fall in the higher wind-driven rain exposure bands, especially coastal and upland sites, so render specification, movement joints and detailing at cills, verges and the base of the wall matter more than usual.
For period homes in Port Talbot, we look for cement patching that may be trapping moisture before suggesting lime.
- Postcode district
- SA13
- County or area
- West Glamorgan
- Nation
- Wales
- Nearby
- Briton Ferry, Neath, Maesteg, Swansea
Approvals in Wales
For homes in Port Talbot, the local planning authority decides any borderline cases; changing a brick house to render, or work on flats, usually needs an application in Wales.
Welsh Building Regulations expect walls to be upgraded when a substantial area is renewed, and building control signs the work off.
Why use lime instead of cement?
Cement render is hard and relatively impermeable. On older walls built with lime mortar, it can crack, let rain in at the cracks and then stop the wall drying, leading to damp patches inside and spalling stone or brick. Lime is softer, more flexible and vapour-open, so moisture can escape.
Lime render prices in Port Talbot
| Item | Guide price | Notes |
|---|---|---|
| Lime render, three-coat | £78–£132 per m²inc VAT | Excluding scaffold |
| Removing cement render first | £22–£48 per m²inc VAT | Where needed |
| Wood fibre + lime EWI | £150–£210 per m²0% VAT | See wood fibre EWI |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%. 0% VAT: installing insulation in a home is zero-rated until 31 March 2027, so these figures are the total; 5% applies from 1 April 2027.
From enquiry to finished wall
Tell us about the property
Use the quote tool or form, or call. Photos help.
Free survey
We measure, check the walls and confirm approvals.
Fixed written quote
System, details, access, exclusions and VAT in writing.
Installation
Scheduled for suitable weather, with a clear programme.
Lime render in Port Talbot: questions
Should I remove cement render from my stone house?
If it's cracked, hollow or trapping damp, often yes. If it's sound and the wall is dry, it may be left. The survey looks at both.
Does lime render need painting?
Traditionally it's limewashed, which is breathable. Modern masonry paints can block vapour, so we'd avoid them.
Is lime render more expensive?
Usually, because it's applied in coats by hand and needs more curing time.
Do you cover Port Talbot?
Yes — we survey and quote lime render in Port Talbot (SA13) and nearby Briton Ferry, Neath and Maesteg, with a fixed written price before any work starts.