Silicone render · Somerset
Silicone render in Burnham-on-Sea
Silicone render in Burnham-on-Sea: free survey, written specification and a fixed price, with the details that keep walls dry planned from the start. If you're re-rendering in Burnham-on-Sea, we'll show you what adding insulation under the silicone would cost at the same time.
- Free survey in TA8 and nearby
- Guide price from £66 per m² + scaffold, inc VAT
- Fixed written price before work starts
Free survey in Burnham-on-Sea
Postcode, service and a phone number is all we need.
Part of every quote
- Fine, even grain from about 1–2mm
- Water-repellent surface that dries quickly after rain
- Through-coloured — no painting needed
- Vapour-open, so walls can still breathe
What we look for in Burnham-on-Sea
As well as Burnham-on-Sea itself, we quote in Weston-super-Mare, Bridgwater and Clevedon. It's roughly 29 miles from Burnham-on-Sea to Bath, the largest town in Somerset. The South West has many stone and solid-walled cottages, exposed coastal properties and a share of post-war system-built houses, including types such as the Cornish Unit.
Exposure to wind-driven rain varies across Somerset: sheltered town streets fare better than walls on high ground or facing the prevailing weather, and the render, beads and cill details are chosen with that in mind.
Silicone suits most rendering jobs in Burnham-on-Sea, either on its own or over insulation.
- Postcode district
- TA8
- County or area
- Somerset
- Nation
- England
- Nearby
- Weston-super-Mare, Bridgwater, Clevedon, Taunton
Permissions in England
Before quoting in Burnham-on-Sea, we check whether the property is in a conservation area, under an Article 4 direction or listed, because that decides whether changing the outside needs planning permission.
Insulating or re-rendering more than half of a wall's area brings in Part L of the Building Regulations, so building control is notified and the wall is upgraded to about 0.30 W/m²K where practical.
Silicone or monocouche?
Monocouche is a thicker single-coat cement render used mainly on new blockwork. Silicone is thinner, more flexible and usually more resistant to staining, and it's the finish used over insulation. On older or mixed walls, silicone over a mesh-reinforced base coat is generally the safer choice.
Silicone render prices in Burnham-on-Sea
| Item | Guide price | Notes |
|---|---|---|
| Silicone render on masonry (with base coat + mesh) | £66–£102 per m²inc VAT | Excluding scaffold |
| Front and side of a semi (≈60 m²) | £3,960–£6,120inc VAT | Plus scaffold |
| As the finish on EWI | Included in EWI rates |
Confirmed by a fixed written quote after survey. Prices include VAT at 20%.
What happens next
Get a guide price
Try the online quote tool for a ballpark figure.
Book the survey
A visit at a time that suits you.
Agree the quote
Nothing starts until you've signed the written price.
We do the work
Planned around weather, with you kept informed.
Silicone render in Burnham-on-Sea: questions
Can silicone render go over old render?
If the old render is sound and well bonded, often yes after cleaning and priming. Hollow or cracked areas are cut out and repaired first.
Does silicone render crack?
The mesh-reinforced base coat and the render's flexibility make cracking much less likely than with sand and cement, but structural movement in the wall can still show through.
Can I paint silicone render later?
Yes, with a compatible silicone paint, though through-coloured render rarely needs it.
Do you cover Burnham-on-Sea?
Yes — we survey and quote silicone render in Burnham-on-Sea (TA8) and nearby Weston-super-Mare, Bridgwater and Clevedon, with a fixed written price before any work starts.